Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 1210MULTIFLEX EDGE CONTROL CABLES Super flexible, low friction, steel conduit sales@meridianzero.co.uk Multiflex Edge 33C Control Cables Super Flexible control cables with low friction sheath and steel conduit. Traditional control cables have a plastic outer which will not bend tightly. The Multiflex Edge cable differs by having a 1.9mm steel core with a swaged, coiled steel surround, which is in turn covered in a flexible plastic coating. The result is just amazing. The Edge cable has a minimum bend radius of just four inches and the low friction sheath maintains smooth use even under tension. When fitting, keep the bends to a minimum to optimise performance. Edge cables are also built to allow for an optimum gap between the inner core and conduit minimising backlash. UV Resistant Low backlash Nylon coated inner for low friction movement Low maintenance Allows small bending radius for complex cable routing. Abrasion resistant Suits Inboard/ Outboard and Sterndrive engines Rod End thread: 10/32 UNF Nominal Travel: 75mm Minimum bend radius: 100mm Part Codes All Multiflex codes are coded 75000 plus the length of the Cable in feet e.g. 75010 is the 10ft cable. * Shortest length is 6ft * Longest length is 40ft A 1.9mm steel core with a swaged, coiled steel surround, which is in turn covered in a flexible plastic coating. The Edge cable has a minimum bend radius of just four inches The low friction sheath maintains smooth use even under tension.