Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12DINGHY RINGS 03 Telephone +44 (0)1268 493 200 Fax +44 (0)1268 543 439 45102 Flex Dinghy Rings Hang over the stern, bow or side of a boat. It’s adjustable in height and width and fits almost any boat. Back your dinghy into the rings and pull the bow up with the painter. Flex Dinghy Rings can be taken apart for storage and the foam rings are tough enough to be used as extra fenders! Specification: Stainless Steel 30 & 25 mm - A4/AISI 316, Straps of UV-resistant polyester, Weight 4 kilos. Dinghy Rings Dinghy Rings, a rotating dinghy davit for storing an inflatable dinghy at the stern or bow of your boat. It’s simple, back your dinghy into Dinghy Rings and pull the bow up with the painter. Dinghy Specification Dinghy Rings fit inflatable dinghies up to 3 metres (Bold model 3.5m), with a maximum weight of 50kg (Bold model 60kg) and a distance of 97cm -127cm between the centre of the conical ends to their sponsons (total dinghy width of 130cm to 170cm). Dinghy Rings are • Convenient, easily handled by one person • Unobtrusive and detachable • Gentle on your boat and dinghy • Quick to launch in emergency situations • Affordable, thanks to a simple and clever design The davit is available in three versions. 1. Flex – Portable Dinghy Rings – deployed on a rope when you need them 2. Slim – Detachable Dinghy Rings – attached through a lightweight, stern swim platform 3. Bold – Detachable Dingy Rings – attached under a larger swim platform 45125 Pontoon Link Soft foam puck glued to flat ends of the sponson of the inflatable to make it compatible with Dinghy Rings. For inflatables up to 50 kg. 200 mm x 70. Sold in pairs. 45108 Slim Dinghy Rings Slim Dinghy Rings are mounted through and under a narrow external swim platform of up to 90cm in width. All of the mountings are hidden underneath the platform and the rings are easily detachable. Can be combined with a ladder. Specification: Stainless Steel 30/25 mm - A4/AISI 316, Straps of UV-resistant polyester, weight 4 kilos 45116 Bold Dinghy Rings Bold Dinghy Rings are mounted under a wide external swim platform of 110cm–300cm. All of the mountings are hidden and both the middle arc and the rings are detachable. Bold Dinghy Rings supports inflatable dinghies up to 60 kilos or 3.5 meters. Specification: Stainless steel 57/50/25 mm - A4/AISI 316, Straps of UV-resistant polyester, Weight 9 kilos Dinghy Davits - portable and detachable