b'MOORING COMPENSATORS | UNIMER MOORING COMPENSATORS | UNIMERMooring compensators & The DrainmanUNIMER MOORINGUnimer Twist & Thread Mooring COMPENSATORS CompensatorHigh quality mooring compensators helpTwist and thread your mooring line through the provide comfort on board and are essential toUnimer Mooring Compensator to give protect mooring lines and deck fittings. Theycushioned relief for mooring lines and absorb tension in the lines and the sudden tugsprotection for pontoon and deck fittings. caused by wind and waves that can harm linesThe compensator features a cleat shaped and weaken deck fittings. locking mechanism that prevents line slip and Unimer make mooring compensators inchafing.Sweden from high quality EPDM rubber,The compensator comes in four sizes for the providing excellent strength and resistance tobest fit for your boat. harsh marine environments.U-Cleat Mooring CompensatorThe U-Cleat Mooring Compensator features a unique removable "U" locking mechanism that allows the user to attach it to a mooring line without a free end. U-Cleat can be repositioned and removed orCodeModelRopefitted to a line with splices or thimbles on both40670Unimer 10-12mmends. When its time to wash your lines U-Cleat40672 Unimer 12-16mmis easy to remove and refit. 40674Unimer14-18mmThe innovative U-Cleat really is a cleat and40676Unime20-24mmlocks the line preventing slippage.This helps U-Cleat to control sudden impacts withoutClassic Mooring Compensatoraffecting the strength or durability of the line. Weave your mooring lines through the classic The U-Cleat Mooring Compensator is made inmooring compensator to give cushioned relief Sweden of high quality EPDM rubber withfor mooring lines and protection for pontoon glass fibre reinforced polyamide insertsand deck fittings. moulded into the rubber. The cleats areThe Classic Mooring Compensator is Unimer\'s manufactured in glass fibre reinforcedbasic model and is made of the same high polypropylene. quality EPDM rubber as all their mooring U-Cleat comes in three sizes for the best fit forcompensators.If you are happy to leave the your boat lines and spare clips are available.compensator threaded on your lines when not in use and can deal with fiddly adjustments then this could be your compensator of choice. The mooring line runs aligned with the compensator, making it perfect for mooring in tight spaces and easy to stow if you have a small boat.CodeModelRope CodeModelRope40651U-Cleat 10-12mm 40691Classic10-12mm40653 U-Cleat 12-16mm 40693 Classic12-16mm40655U-Cleat16-20mm 40695Classic14-18mmSmart Snubber 40715 Drainman Bilge Pump Water is sucked from the bilge through the Perfect for day outings and mooring in naturalDrainman prevents moored, uncoveredhose intake placed in the lowest point of the harbours, Unimers innovative Smart Snubberboats and tenders accumulating water byboat. A small weight can be attached to the provides fast, efficient relief and protectionusing the energy from the boats motion toeye-bolt at the intake to make sure the hose against tugging lines. power Drainmans bilge pump.remains positioned correctly. A sieve on the Smart Snubber is fitted directly on to the lineThe Drainman bilge pump is powered by theeye-bolt keeps dirt out of the hose, and is and doesnt require any free end. This makes ittugs created on the mooring line from wind,easy to clean. The hose is 3 metres long.A easy to adjust, remove and add more. surf and waves. All natural and with noneoprene cover protects the pump from The Smart Snubber is made of an advanced electricity. sunlight, wear and tear. polyurethane material that gives it enduringDrainman is handy to carry, easy to install & elasticity in any weather, even after years oflock into place. It can be fitted to mooringFitting and Operationuse. lines fore, aft or on the side of your boat. You1. The Drainman features two loops, one on Smart Snubber is small and easy to fit alsocan even place it in between your boat andeither side. One loop is connected to a making it suitable for sheets, to cushion tugsdinghy. mooring line by means of a shackle or a and snatches. Drainman is made with tough materials andsnap-hook.Available in 2-pack can withstand forces up to 5,000 Newton.2. The loop on the other side is connected to The pump works around the clock and has athe boat such that the Drainman is attached capacity to pump as much as 2,500 litres ofbetween the boat and the mooring point. water every twenty-four hours. Drainman is3. Place the sieve of the suction hose in the CodeModelRope self-priming, has a suction height of up to 2.5lowest point of the boat (the keelson), where 40683U-Cleat 10-12mm metres and a suction length of up to 8it can easily drain the water. 40685 U-Cleat 12-16mm metres.156 | 157'