b'COMPOATABLESITES FIT | FOTINGOT SPU | MTRPUSDESIGN - BALL VALVES COMPOATABLESITES FIT | STTINGIRRUSP|P TURMUPDSESIGN - BALL VALVESINFL INFLNo Corrosion, No Electrolysis, No Worries The Bronze Age is OverWHY COMPOSITES?Ball Valves (Seacocks) Trudesign Ball ValvesFor many years, bronze has been theTruDesign Ball Valves control thru-hull inlet and outletThe body of the Ball Valve is material of choice for use inrequirements, above and below the water line. They aremanufactured in glass-reinforced nylon underwater marine applications suchmoulded in a lightweight glass-reinforced Nyloncomposite with high impact and tensile as thru-hull fittings and seacocks. Itcomposite material to provide maximum strength.strength resulting in a light weight unit, outperformed many other metals andThe ball and seal ring are moulded in a PTFE filledfree from corrosion and electrolysis alloys and has stood the test of time.polymer for lubricated, smooth continuous ease ofissues. The ball and sealing rings utilise Until now. operation. This material resists marine growth, such asa PTFE polymer to ensure a smooth barnacles, preventing them from seizing up the valve. action, and continuous ease of Designed and made in New Zealand,Features:operation over many years. It should TruDesign Skin Fittings (Thru-Hulls) areLightweight, corrosion resistant and safe frombe installed next to the skin fitting such precision moulded from glass- electrolysisthat any leaks or damage to the reinforced Nylon composite. Individually leak and pressure testedplumbing are isolated within the boat.Burst-rated to 750 PSI (5,170 kPa)Trudesign Ball Valves can be locked in Strong & DurableCan be locked to comply with toilet waste outletthe closed position for use on toilet BSP threads comply with ISO andstandardswaste outlets. ABYC mechanical properties, strengthOPEN/CLOSED positions marked for easyBSP tests and UV requirements. identificationThe valve and other fittings are Certified to ISO 9093-2 by BureauFrost-friendly and wont split like metallic ball valvessupplied with BSP thread where Veritas and the International Marinecan when frozenrelevant.Certification Institute (IMCI, Belgium).Removable handles to assist installationComplies with ABYC H-27 standards when used in conjunction with the TRUDESIGN ABYC collarFlame RetardantCan be used in engine compartments.MaterialsManufactured from a glass-reinforced Nylon compositeHigh strength, tough and light weight.Light Weight 6 to 1 weight saving over bronze. No Bonding No need for expensive wiring of thru-hull fittings. Non CorrosiveImmune to corrosion & electrolysis. No electrolysis giving peace of mind with respect to the safety of your boat.Hull TypesSuitable for use on all hull types - aluminium, steel, wood or FRP.CodeProduct SizeSize 58001Ball Valve13mm 58003Ball Valve19mm 58005Ball Valve1"25mm 58007Ball Valve132mm58009Ball Valve138mm58011Ball Valve2"50mm58013Ball Valve3"75mm60| 61'